Axel AX3000 65 User's Manual Bedienungsanleitung PDF herunterladen (Seite 52)

Interactive Set-Up

40 AX3000 - User's Manual

- Auto-Connection: if this parameter is set to 'yes', the connection will

be automatically established when the AX3000 is powered-up.

Otherwise, the user can press any key on the serial terminal keyboard

to establish the connection.

- Auto-Reconnection: if this parameter is set to 'yes', a new

connection is automatically established after a disconnection.

Otherwise, the user can press any key on the serial terminal keyboard

to establish a new connection.

- Enhanced parameters: see Appendix A.9.3.

Note: the serial auxiliary port used must be configured for 'bi-directional'

operating mode.

3.5.4 - Connecting other Peripherals

The Unix/Linux tty service provides bi-directional control of the device.

Note: only the two serial auxiliary ports are bidirectional. For other ports

(parallel and logical ports) the tty service acts as a unidirectional service.

To set the tty service on the port, enter the following parameters in the

[Configuration]-[Ports]-[xxx]-[yyy] dialog box:

- Service: select tty.

- Parameters: press <Space> to access the following box:

- Host: name of the host selected from a menu (see Chapter 3.1.3).

- TCP Port: numeric identifier of the tty service on the target host. The

TCP Port default value is 2048.

- Auto-Reconnection: if this parameter is set to 'yes', a new

connection is automatically established after a disconnection.

Otherwise, the AX3000 must be power-cycled.

- Enhanced parameters: see Appendix A.9.3.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 275 276

Keine Kommentare

Axel AX3000 65 User's Manual Bedienungsanleitung Seite 52