Axel Oxygen 5 Bedienungsanleitung PDF herunterladen (Seite 44)

TELCO MODULE

ENG

Axel Technology srl www.axeltechnology.com TELCO MODULE

15.4 HOOK SWITCH AND RING LED

The Hook switch remotely controls the Line hooking on suitable telephone hybrids

(such as Macrotel 5,7,9 and BoxTel by Axel Technology). This switch connects /

disconnects the hybrid from the telephone line and mutes the channel (ie. when

Hook is depressed, Receive input is automatically muted).

The HOOK LED switchs on only with telephone line properly connected.

Ring LED blinks when a call (ring) is coming. This requires a suitable control by

the external telephone hybrid (such as Macrotel 5,7,9 and BoxTel by Axel

Technology). Please refer to Telco Remote Interface - par. 0.

If the HOOK switch is pressed with an external hybrid properly connected, the red

HOOK LED will illuminate and the caller is connected to the Telco module but not

yet heard in the broadcast because the fader is still down.

By opening the fader, the Telco module will be activated and the signal will enter

the program (see also MASTER/SUB switches par. 15.5 and PFL PRIVATE button

par. 15.6)

15.5 MASTER-SUB ROUTING SWITCHES

The input channel signal may be routed to the main Stereo MIX (L-R) and/or to the

SUB bus by pressing the respective switches.

There is a red LED inside each switch which will illuminate accordingly.

The Sub mix can be mixed into the main output mixbus (Master) (see MASTER

routing switcher on the Sub module). This is a convenient way to use the SUB

assigment switch as a su/jointfilesconvert/401790/bgroup system, creating new possibilities in the Oxygen 5

console.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 63 64

Keine Kommentare

Axel Oxygen 5 Bedienungsanleitung Seite 44